This process usually works for resetting any router to it’s factory setting. Any filter rule configured in the menu will appear in the Filters List with the new settings. This window is used to change the system password used to access the web manager, to save or load Router configuration settings and to restore default settings. If you have performed a reset of your DSLT device or not changed the defaults, you should be able to access it with the following settings:. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. Hard reset instructions for D-Link DSLT If your DSLT router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Enter text from picture:

Uploader: Samuran
Date Added: 15 December 2012
File Size: 14.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 94415
Price: Free* [*Free Regsitration Required]

From the top menu, select Tools.

Line – This port connects to the wall jack. One of the problems over which I was confused was that I changed the configurations in the router configuration webpage and then clicked Apply. This may not be available to all ADSL accounts. To save the current configuration settings to your computer, ads2 the System button in the Tools directory to display the System Settings window.

D-Link DSLT Wireless ADSL Router Not Saving Settings Permanently

I’m the brain behind technize. A Spain Turkey Mt. You may set the Beacon Interval range between microseconds per beacon sent.


This section provides a brief description of the Router, its associated technologies, and a list of Router features. It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL sireless in the future. The Router must save the new settings and reboot before the new rules are applied.

D-Link DSLT – wireless router – DSL modem – b/g – desktop Overview – CNET

Most user will only need to change some or all of The two basic styles of route pass filters commonly used are described below. Ethernet network or single computer. Make sure you have all the necessary information before you configure the WAN connection. This will change the window to look like the window below. Time menu To configure system axsl2 on the Router, select the method used to ljnk time.

This window is used to change the system password used to access the web manager, to save or load Router configuration settings and to restore default settings. I am experiencing the same problem. The device will restart with default settings. The Administrator Settings window is the first item in the Tools directory.

Do you still have questions concerning the router that you can’t find online?

Don’t show me this message again. I am losing the settings after every reboot.


To disable the wireless access point, click the Enable AP option box to remove the green check mark. The initial window summarizes the setup process.

D-Link DSL-2640T – wireless router – DSL modem – 802.11b/g – desktop

Sanix Author July 15, at Choose the Connection Type from the pull-down menu located under the User Name and Password entry fields. If you experience rokter signal strength or slow throughput, consider positioning the Router in a different location. Thank for sharing, Its much help my problem with dlink …. From the left hand menu, select System. See the Rear Panel diagram above and the illustrations below for examples.

D-Link DSL-2640T Wireless ADSL Router Not Saving Settings Permanently

Filter rules can be set up for source, destination or both. When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices.

Configuring these settings may increase the performance of your router but if you are not familiar with networking devices and protocols, this section should be left at its default settings. This will save your configuration permanently and restart the router.